What is the crimping pliers? What is the difference between it and the terminal clamp?

What is the crimping pliers? What is the difference between it and the terminal clamp?
Crimping pliers, also known as strippers, are a tool used to suppress crystal heads. Common telephone line connectors and network cable connectors are pressed with wire cutters.

SN-02WF2C

Is the crimping tool and the terminal clamp the same?

The crimping tool is the same as the terminal clamp, which is a device that presses the metal wire and the terminal: such as a telephone wire connector and a cable connector.

Terminal crimping tool use

As shown in Fig. 1, first check whether the crimped terminal and the wire specifications match.

2. Select the mold to be pressed, for example, the terminal size 240 to be pressed, then select the upper mold of 240.

3. Insert the mold into the piston and mold holder.

4, the pump use method: the oil return switch in the clockwise direction, repeatedly shake the handle, look at the mold, when the upper and lower molds touch a place, it means that the pressure is completed, if the user does not pay attention to continue to shake, the piston stops Advance, at this time, the oil return switch should be turned counterclockwise, then the piston returns to the original position. Note: If the mold is not installed, it cannot be pressed to avoid the piston and the jaws are damaged.


Post time: Aug-18-2019
WhatsApp Online Chat !